Main Content

9080 Technical specifications

Engine data Standard

Manufacturer  Deutz
Engine type  TCD 3.6 S5
Cylinders  4
Engine performance  100 (136) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  3621 cm³
Cooling system  Water/charge air
Emissions standard level  V
Exhaust after treatment  DOC/DPF/SCR

Engine data Option

Manufacturer  Deutz
Engine type  TCD 4.1 S5
Cylinders  4
Engine performance  115 (156) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  4038 cm³
Cooling system  Water/charge air
Emissions standard level  V
Exhaust after treatment  DOC/DPF/SCR

Electrical system 

Operating voltage  12 V
Alternator (optional) 120 (150) A

Weights 

Operating weight (standard)  10722 kg
Tipping load with bucket - machine straight  5290 kg
Tipping load with bucket - machine articulated  4652 kg
Tipping load with pallet fork - machine straight  4624 kg
Tipping load with pallet fork - machine articulated  4071 kg

Vehicle data 

Axle  PA1900
Cab  Cab
Ground speed  0-20 (30/40) km/h
Speed stages  3
Fuel tank capacity  140 l
Hydraulic oil tank capacity  125 l

Hydraulic system  

Steering hydraulics - Oil flow (optional) 150 (180) l/min
Steering hydraulics - Operating pressure  250 bar

Drive 

Type of drive  Hydrostatic
Traction drive  Universal joint shaft

Tipping load calculation according to ISO 14397 (horizontal mast)

DPF = Diesel Particulate Filter
DOC = Diesel Oxidation Catalyst
SCR = Selective Catalytic Reduction


Vibrations (weighted average effective value)

Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.

When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.

It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. At the same time the actual use conditions have to be taken into consideration.

Telehandler, like wheel loaders, are to be classified by operating weight.


Average value Standard deviation (s)
Type of loader Typical operating conditions 1.4*aw,eqx 1.4*aw,eqy aw,eqz 1.4*sx 1.4*sy sz
[m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheel loader
(operating weight
< 4500 kg)
Load & carry (load and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
Wheel loader
(operating weight
> 4500 kg)
Load & carry (load and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Transfer drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14