Main Content

5080 Technical specifications

Engine data Standard

Manufacturer  Perkins
Engine type  904J-E36TA
Cylinders  4
Engine performance  100 (136) kW (hp)
at rpm (max.)  2200 rpm
Cubic capacity  3621 cm³
Cooling system  Water
Emissions standard level  V
Exhaust after treatment  DOC/DPF/SCR

Electrical system 

Operating voltage  12 V
Battery  135 Ah
Alternator  85 A


Operating weight (standard)  7000 kg
Tipping load with bucket - machine straight  4762 kg
Tipping load with bucket - machine articulated  3926 kg
Tipping load with pallet fork - machine straight  4254 kg
Tipping load with pallet fork - machine articulated  3559 kg

Vehicle data 

Axle  PA 1422/2
Cab  Cabin
Ground speed (optional) 0- 20 (30, 40) km/h
Speed stages  2
Fuel tank capacity  105 l
Hydraulic oil tank capacity  95 l

Hydraulic system  

Steering hydraulics - Oil flow (optional) 100 (115-150) l/min
Steering hydraulics - Operating pressure  210 bar


Type of drive  Hydrostatic
Traction drive  Universal joint shaft

Noise values 

Guaranteed sound power level LwA  103 dB(A)
Specified sound pressure level LpA  78 dB(A)

Tipping load calculation according to ISO 14397 (horizontal mast)

DPF = Diesel particulate filter
DOC = Diesel oxidation catalytic converter
SCR = Selective catalytic reduction

Vibrations (weighted average effective value)

Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with a operator’s seat that meets the requirements of EN ISO 7096:2000.

When the loader is properly used, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.

It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. At the same time, the actual use conditions have to be taken into consideration.

Telehandlers, like wheel loaders, are to be classified by operating weight.

Mean value Standard deviation (s)
Type of loader Typical operating conditions 1.4*aw,eqx 1.4*aw,eqy aw,eqz 1.4*sx 1.4*sy sz
[m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheel loader
(operating weight
< 4,500 kg)
Load & carry (load and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
Wheel loader
(operating weight
> 4,500 kg)
Load & carry (load and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Delivery drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14