Main Content

2080 Technical specifications

Engine data Standard

Manufacturer  Deutz
Engine type  TD 2.9 L4 S5
Cylinders  4
Engine performance  45 (61) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  2,900 cm³
Cooling system  Water
Emissions standard level  V
Exhaust after treatment  DPF / DOC

Engine data Optional

Manufacturer  Deutz
Engine type  TCD 2.9 L4 S5
Cylinders  4
Engine performance  55.4 (75) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  2,900 cm³
Cooling system  Water / Charge air
Emissions standard level  V
Exhaust after treatment  DPF / DOC

Electrical system 

Operating voltage  12 V
Alternator  95 A

Weights 

Operating weight (standard)  4200 / 4300* kg
Tipping load with bucket - machine straight  3020 / 3320* kg
Tipping load with bucket - machine articulated  2.494/3.113* kg
Tipping load with pallet fork - machine straight  2511 / 2726* kg
Tipping load with pallet fork - machine articulated  2.173/2.662* kg

Vehicle data 

Axle  PA 1200
Cab  Cab
Ground speed (optional) 0 - 20 (28) km/h
Speed stages  2
Fuel tank capacity  65 l
Hydraulic oil tank capacity  50 l

Hydraulic system  

External services - Operating pressure  450 bar
Steering hydraulics - Oil flow (optional) 56 (63-116) l/min
Steering hydraulics - Operating pressure  210 bar

Drive 

Type of drive  Hydrostatic
Traction drive  Universal joint shaft

Noise values 

Average sound power level LwA  99.3 dB(A)
Guaranteed sound power level LwA  101 dB(A)
Specified sound pressure level LpA  78 dB(A)

* Values with optional Deutz engine
tipping load calculation according to ISO 14397


Vibrations (weighted average effective value)

Hand-arm vibrations (HAV): The hand-arm vibrations are no more than 2.5 m/s²
Whole body vibrations: This machine is equipped with a driver's seat that meets the requirements of EN ISO 7096:2000.

When the loader is properly used, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.

It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. At the same time the actual use conditions have to be taken into consideration.

Telescopic loaders, like wheel loaders, are to be classified by operating weight.


    Average value Standard deviation (s)
Type of loader Typical operating conditions 1.4*aw,eqx 1.4*aw,eqy aw,eqz 1.4*sx 1.4*sy sz
    [m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheel loader
(operating weight
< 4,500 kg)
Load & carry (load and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
Wheel loader
(operating weight
> 4,500 kg)
Load & carry (load and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Transfer drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14