*Tipping load values when extended
Tipping load calculation according to ISO 14397 (horizontal mast)
DPF = Diesel particulate filter
DOC = Diesel oxidation catalytic converter
SCR = Selective catalytic reduction
Vibrations (weighted average effective value)
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with a operator’s seat that meets the requirements of EN ISO 7096:2000.
When the loader is properly used, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. At the same time, the actual use conditions have to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
| Mean value | Standard deviation (s) | ||||||
| Type of loader | Typical operating conditions | 1.4*aw,eqx | 1.4*aw,eqy | aw,eqz | 1.4*sx | 1.4*sy | sz |
| [m/s²] | [m/s²] | [m/s²] | [m/s²] | [m/s²] | [m/s²] | ||
| Compact wheel loader (operating weight < 4,500 kg) | Load & carry (load and transport work) | 0.94 | 0.86 | 0.65 | 0.27 | 0.29 | 0.13 |
| Wheel loader (operating weight > 4,500 kg) | Load & carry (load and transport work) | 0.84 | 0.81 | 0.52 | 0.23 | 0.2 | 0.14 |
| Application in extraction (harsh application conditions) | 1.27 | 0.97 | 0.81 | 0.47 | 0.31 | 0.47 | |
| Delivery drive | 0.76 | 0.91 | 0.49 | 0.33 | 0.35 | 0.17 | |
| V-operation | 0.99 | 0.84 | 0.54 | 0.29 | 0.32 | 0.14 | |
