Main Content

4080LPT Technical specifications

Engine data 

Manufacturer  Deutz
Engine type  TCD 2.9 L4 S5
Cylinders  4
Engine performance  55.4 ( 75 ) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  2900 cm³
Cooling system  Water/charge air
Emissions standard level  V
Exhaust after treatment  DPF/DOC

Electrical system 

Operating voltage  12 V

Weights 

Operating weight (standard)  6000 kg
Lift force (max.)  4,428 daN
Tipping load with bucket - machine straight  3363 (1913*) kg
Tipping load with bucket - machine articulated  2872 (1604*) kg
Tipping load with pallet fork - machine straight  3055 (1338*) kg
Tipping load with pallet fork - machine articulated  2617 (1550*) kg

Vehicle data 

Axle  PA 1422
Cab (optional) FSD (cabin)
Ground speed (optional) 0–20 (30) km/h
Speed stages  2
Fuel tank capacity  82 l
Hydraulic oil tank capacity  66 l

Hydraulic system  

Steering hydraulics - Oil flow (optional) 64 (73–103) l/min
Steering hydraulics - Operating pressure  235 bar

Drive 

Type of drive  Hydrostatic
Traction drive  Universal joint shaft

Noise values 

Guaranteed sound power level LwA  101 dB(A)

* extended

Tipping load calculation according to ISO 14397

FSD = overhead guard


Vibrations (weighted average effective value)

Hand-arm vibrations (HAV): The hand-arm vibrations are no more than 2.5 m/s²
Whole body vibrations: This machine is equipped with a driver’s seat that meets the requirements of EN ISO 7096:2000.

When

the loader is in accordance with the intended purpose, the whole body

vibrations vary from below 0.5 m/s² up to a short-term

maximum value.

It is recommended to use the values

specified in the table when calculating the vibration values

according to ISO/TR 25398:2006. At the same time the actual use conditions have to be taken into

consideration.

Tele wheel loaders, like wheel loaders, are to be classified by operating weight.


Average value Standard deviation (s)
Type of loader Typical operating conditions 1.4*aw,eqx 1.4*aw,eqy aw,eqz 1.4*sx 1.4*sy sz
[m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheel loader
(operating weight
< 4,500 kg)
Load & carry (load and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
Wheel loader
(operating weight
> 4,500 kg)
Load & carry (load and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Transfer drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14