Main Content

3080LPT Technical specifications

Engine data Standard

Manufacturer  Deutz
Engine type  TD 2.9 L4 S5
Cylinders  4
Engine performance  45 (61) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  2900 cm³
Cooling system  Water
Emissions standard level  V
Exhaust after treatment  DPF / DOC

Engine data (optional)

Manufacturer  Deutz
Engine type  TCD 2.9 L4 S5
Cylinders  4
Engine performance  55.4 (75) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  2900 cm³
Cooling system  Water / Charge air
Emissions standard level  V
Exhaust after treatment  DPF / DOC

Electrical system 

Operating voltage  12 V

Weights 

Operating weight (standard)  5000 kg
Lift force (max.)  4,428 daN
Tipping load with bucket - machine straight  2435 (1295*) kg
Tipping load with pallet fork - machine straight  2229 (1268*) kg

Vehicle data 

Axle  PA 1400
Cab  FSD (cabin)
Ground speed  0-20 (30) km/h
Speed stages  2
Fuel tank capacity  82 l
Hydraulic oil tank capacity  66 l

Hydraulic system  

Steering hydraulics - Oil flow  64,4 (74-103) l/min
Steering hydraulics - Operating pressure  235 bar

Noise values 

Guaranteed sound power level LwA  101 dB(A)

* extended

Tipping load calculation according to ISO 14397

FSD = overhead guard


Vibrations (weighted average effective value)

Hand-arm vibrations (HAV): The hand-arm vibrations are no more than 2.5 m/s²
Whole body vibrations: This machine is equipped with a driver’s seat that meets the requirements of EN ISO 7096:2000.

When

the loader is in accordance with the intended purpose, the whole body

vibrations vary from below 0.5 m/s² up to a short-term

maximum value.

It is recommended to use the values

specified in the table when calculating the vibration values

according to ISO/TR 25398:2006. At the same time the actual use conditions have to be taken into

consideration.

Tele wheel loaders, like wheel loaders, are to be classified by operating weight.


Average value Standard deviation (s)
Type of loader Typical operating conditions 1.4*aw,eqx 1.4*aw,eqy aw,eqz 1.4*sx 1.4*sy sz
[m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheel loader
(operating weight
< 4,500 kg)
Load & carry (load and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
Wheel loader
(operating weight
> 4,500 kg)
Load & carry (load and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Transfer drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14