Main Content

2080LPT Technical specifications

Engine data Standard

Manufacturer  Deutz
Engine type  TCD 2.9 L4 S5
Cylinders  4
Engine performance  45 (61) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  2900 cm³
Cooling system  Water
Emissions standard level  Stage V
Exhaust after treatment  DPF + DOC

Engine data Option

Manufacturer  Deutz
Engine type  TCD 2.9 L4 S5
Cylinders  4
Engine performance  55.4 (75) kW (hp)
at rpm (max.)  2300 rpm
Cubic capacity  2900 cm³
Cooling system  Water / charge air
Emissions standard level  Stage V
Exhaust after treatment  DPF + DOC

Electrical system 

Operating voltage  12 V
Alternator  95 A

Weights 

Operating weight (standard)  4400 kg
Tipping load with bucket - machine straight (extended) 2437 - 2556 (1359 - 1437) kg
Tipping load with bucket - machine articulated (extended) 2041 - 2152 (1139 - 1219) kg
Tipping load with pallet fork - machine straight (extended) 2177 - 2266 (1287 - 1364) kg
Tipping load with pallet fork - machine articulated (extended) 1796 - 1907 (1053 - 1125) kg

Vehicle data 

Axle  PA1200
Cab (optional) FSD (cab)
Ground speed  0-20 km/h
Speed stages  2
Fuel tank capacity  65 l
Hydraulic oil tank capacity  50 l

Hydraulic system  

External services - Operating pressure  450 bar
Steering hydraulics - Oil flow (optional) 57.5 (74) l/min
Steering hydraulics - Operating pressure  235 bar

Drive 

Type of drive  Hydrostatic
Traction drive  Universal joint shaft

Noise values 

Guaranteed sound power level LwA  101 dB(A)
Specified sound pressure level LpA  75 dB(A)

Tipping load calculation according to ISO 14397 (lift frame horizontal)

DPF = Diesel Particulate Filter
DOC = Diesel Oxidation Catalyst
SCR = Selective Catalytic Reduction
FSD = operator's canopy


Vibrations (weighted average effective value)

Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.

When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.

It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.

Telehandlers, like wheel loaders, are to be classified by operating weight.


Mean value Standard deviation (s)
Type of loader Typical operating conditions 1.4*aw,eqx 1.4*aw,eqy aw,eqz 1.4*sx 1.4*sy sz
[m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheel loader
(operating weight
< 4,500 kg)
Load & carry (load and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
Wheel loader
(operating weight
> 4,500 kg)
Load & carry (load and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Delivery drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14