Main Content

T7042 Technical specifications

Engine data Standard

Manufacturer  Perkins
Engine type  904J-E36TA
Cylinders  4
Engine performance  90 (122) kW (hp)
at rpm (max.)  2200 rpm
Cubic capacity  3621 cm³
Cooling system  Water
Emissions standard level  V
Exhaust after treatment  DOC / DPF / SCR

Engine data Option

Manufacturer  Perkins
Engine type  904J-E36TA
Cylinders  4
Engine performance  100 (136) kW (hp)
at rpm (max.)  2200 rpm
Cubic capacity  3621 cm³
Cooling system  Water
Emissions standard level  V
Exhaust after treatment  DOC / DPF / SCR

Electrical system 

Operating voltage  12 V
Battery  12V 185 Ah
Alternator  150 A

Weights 

Operating weight (standard)  7650 kg
Payload (max.)  4,200 kg

Vehicle data 

Axle  PAL 1390
Cab  Cab
Ground speed (optional) 0-20 (30 / 40) km/h
Speed stages  2
Fuel tank capacity  142 l
Hydraulic oil tank capacity  90 l
Steering angle (max.)  2x45 °

Hydraulic system  

External services - Operating pressure  500 bar
Steering hydraulics - Oil flow (optional) 138.6 (187) l/min
Steering hydraulics - Operating pressure  261 bar

Drive 

Type of drive  Electronic controlled drive system
Traction drive  Hydrostatic via PTO gear and driveshaft

Noise values 

Average sound power level LwA  103 dB(A)
Guaranteed sound power level LwA  106 dB(A)
Specified sound pressure level LpA  76 dB(A)

DOC (diesel oxidation catalytic converter)

DPF (diesel particulate filter)

SCR = Selective Catalytic Reduction


Vibrations (weighted average effective value)

Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.

When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.

It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. At the same time, the actual use conditions have to be taken into consideration.

Telehandlers, like wheel loaders, are to be classified by operating weight.


Mean value Standard deviation (s)
Type of loader Typical operating conditions 1,4*aw,eqx 1,4*aw,eqy aw,eqz 1,4*sx 1,4*sy sz
[m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheel loader
(Operating weight
< 4500kg)
Load & carry (loading and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
Wheel loader
(Operating weight
> 4500kg)
Load & carry (loading and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Delivery drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14