Main Content

T6027 Technical specifications

Engine data Standard

Manufacturer  Kohler
Engine type  KDI 2504 TCR
Cylinders  4
Engine performance  55.4 (75) kW (hp)
at rpm (max.)  2600 rpm
Cubic capacity  2200 cm³
Cooling system  Water
Emissions standard level  V
Exhaust after treatment  DPF / DOC

Electrical system 

Operating voltage  12 V
Alternator  80 A


Operating weight (standard)  5225 kg
Payload (max.)  2,700 kg

Vehicle data 

Axle  PAL 1720
Cab  Cabin
Ground speed  0- 20 (30) km/h
Speed stages  3
Fuel tank capacity  100 l
Hydraulic oil tank capacity  75 l
Steering angle (max.)  2x38 °

Hydraulic system  

External services - Operating pressure  450 bar
Steering hydraulics - Oil flow  90 l/min
Steering hydraulics - Operating pressure  245 bar


Type of drive  Hydrostatic
Traction drive  Universal joint shaft

Noise values 

Average sound power level LwA  103 dB(A)
Guaranteed sound power level LwA  104 dB(A)
Specified sound pressure level LpA  80 dB(A)

Second values measured without vls (vertical lift system).

Vibrations (weighted average effective value)

Hand-arm vibrations (HAV): The hand-arm vibrations are no more than 2.5 m/s²
Whole body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.

When the loader is properly used, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.

It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. At the same time, the actual use conditions have to be taken into consideration.

Telehandlers, like wheel loaders, are to be classified by operating weight.

Average value Standard deviation (s)
Type of loader Typical operating conditions 1.4*aw,eqx 1.4*aw,eqy aw,eqz 1.4*sx 1.4*sy sz
[m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheel loader
(operating weight
< 4,500 kg)
Load & carry (load and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
Wheel loader
(operating weight
> 4,500 kg)
Load & carry (load and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Transfer drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14