Main Content

T5522 Technical specifications

Engine data 

Manufacturer  Perkins
Engine type  404J-E22T
Cylinders  4
Engine performance  45 (61) kW (hp)
at rpm (max.)  2800 rpm
Cubic capacity  2200 cm³
Cooling system  Water
Emissions standard level  V
Exhaust after treatment  DPF / DOC

Electrical system 

Operating voltage  12 V
Alternator (optional) 85 ( 120 ) A

Weights 

Operating weight (standard)  4200 kg
Payload (max.)  2,200 kg

Vehicle data 

Axle  PAL 1530
Cab  Cab
Ground speed (optional) 0-20 ( 30 ) km/h
Speed stages  2
Fuel tank capacity  70 l
Hydraulic oil tank capacity  55 l
Steering angle (max.)  2 x 40 °
Lifting cylinder: raise / lower  6.2/4.2 sec
Extension cylinder: extend / retract  5.1/2.5 sec
Tipping cylinder: crowd / tilt  3.1/2.2 sec

Hydraulic system  

External services - Operating pressure  450 bar
Steering hydraulics - Oil flow (optional) 70 ( 106 ) l/min
Steering hydraulics - Operating pressure  225 bar

Drive 

Type of drive  Hydrostatic
Traction drive  Universal joint shaft

Noise values 

Guaranteed sound power level LwA  103 dB(A)
Specified sound pressure level LpA  82 dB(A)

Second values measured without vls (vertical lift system)


Vibrations (weighted average effective value)

Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole body vibrations: This machine is equipped with a driver's seat that meets the requirements of EN ISO 7096:2000.

When the loader is properly used, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.

It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. At the same time the actual use conditions have to be taken into consideration.

telehandlers, like wheeled loaders, are to be classified by operating weight.

Average value Standard deviation (s)
Type of loader Typical operating conditions 1.4*aw,eqx 1.4*aw,eqy aw,eqz 1.4*sx 1.4*sy sz
[m/s²] [m/s²] [m/s²] [m/s²] [m/s²] [m/s²]
Compact wheeled loader
(operating weight
< 4,500 kg)
Load & carry (load and transport work) 0.94 0.86 0.65 0.27 0.29 0.13
wheeled loader
(operating weight
> 4,500 kg)
Load & carry (load and transport work) 0.84 0.81 0.52 0.23 0.2 0.14
Application in extraction (harsh application conditions) 1.27 0.97 0.81 0.47 0.31 0.47
Transfer drive 0.76 0.91 0.49 0.33 0.35 0.17
V-operation 0.99 0.84 0.54 0.29 0.32 0.14